Gratomic Provides Drilling Update on Capim Grosso Graphite Project

TORONTO, ON / ACCESSWIRE / June 27, 2022 / Gratomic Inc. ("Gratomic", "GRAT," or the "Company") (TSXV:GRAT)(OTCQX:CBULF)(FSE:CB82) announces that an additional 778.2 m of drilling (for a total of 3,162.8 m to date (the press release dated May 25, 2022 erroneously reported 2,177.7 m for 18 holes but the actual number was 2384.6 m)) of the 5,000-meter drilling campaign on its Capim Grosso graphite project has been completed. 22 diamond drillholes (DD) have been completed to date, with two additional holes in progress. Included in this press release are assay details on holes 14, 15 and 16, outstanding assay results on the remaining completed holes will follow at a later date. The project is located in the Bahia State of Brazil, with the Company holding a 100% controlling interest in the property.

Table 1: Drillholes completed to date on the Capim Grosso Project in Brazil (WGS84 UTM 24S)

NAMEXYZAZIMUTHDIPEOH

CGD001

391942

8749876

381

45

-58

100.10

CGD002

391867

8749905

382

50

-60

141.20

CGD003

391926

8749863

381

50

-60

120.55

CGD004

391842

8749975

381

50

-60

93.15

CGD005

391775

8750076

378

50

-60

111.00

CGD006

391722

8750171

378

50

-60

120.65

CGD007

391626

8750343

375

50

-60

120.20

CGD008

391755

8750196

376

50

-60

100.05

CGD009

391603

8750328

376

50

-60

120.00

CGD010

391597

8750372

375

50

-60

141.00

CGD011

391574

8750352

376

50

-60

140.05

CGD012

391533

8750454

373

50

-60

134.65

CGD013

391431

8750595

373

50

-60

140.70

CGD014

391392

8750562

376

50

-60

206.90

CGD015

391336

8750756

371

50

-60

151.00

CGD016

391317

8750785

371

50

-60

151.15

CGD017

391294

8750765

372

50

-60

162.05

CGD018

391233

8750891

369

50

-60

130.20

CGD019

391115875106637150-60190.15

CGD020

390523875197838450-60190.75

CGD021

390438875210138550-60195.10

CGD022

390336875223838550-60202.20

The fourth batch of its drillhole assays from the Capim Grosso Project has been received from SGS Geosol in Brazil which included the following:

  • 50 assays, which includes three internal Certified Reference Materials (CRM)

Table 2: Table 2 highlights intervals from holes CGD014, CGD015 and CGD016 on the Capim Grosso Project in Brazil (1 % TGC cut-off grade and 3 % minimum TGC grade used). More detailed information of the assay results from the 2 holes is set out in Table 3 below. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 98 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.

DH_Hole

DH_From_m

DH_To_m

Hole_ID

Length_m

TGC_%

TGC_ BEST INTERVAL

CGD014

121.30

121.88

CGD014

0.58

10.55

0.58m @ 10.55 % TGC
CGD014

171.11

172.40

CGD014

1.29

6.56

1.29m @ 6.56 % TGC
CGD014

173.58

174.32

CGD014

0.74

7.09

0.74m @ 7.09 % TGC
CGD015

70.50

78.40

CGD015

7.90

9.46

7.90m @ 9.46 % TGC
CGD015

116.90

118.96

CGD015

2.06

3.17

2.06m @ 3.17 % TGC
CGD016

63.40

68.70

CGD016

5.30

4.62

5.30m @ 4.62 % TGC
CGD016

103.60

104.78

CGD016

1.18

7.20

1.18m @ 7.20 % TGC
CGD016

107.46

108.88

CGD016

1.42

6.62

1.42m @ 6.62 % TGC

SGS Geosol's graphitic carbon assay methods and equipment include the LECO carbon-sulphur analyzer and high temperature combustion infrared detection. During this procedure, the carbon in the sample is converted to carbon dioxide CO2, which is then measured by infrared (IR) detectors.

Once the drilling is complete and all drillholes are assayed, the Company intends to process the obtained data in order to generate a Maiden Mineral Resource Estimate in accordance with the requirements of National Instrument 43-101 - Standards of Disclosure for Mineral Projects (" NI 43-101 ") for the Capim Grosso asset, which will be combined with pilot metallurgical testing data and other relevant information in order to generate a Feasibility Study (FS) and fast track the project development.

Table 3: Graphitic carbon assays from a further 3 drillholes completed to date on the Capim Grosso Project in Brazil (all drillholes to date have intersected graphite). Drill core was halved, and samples taken according to visual grade estimation in one meter increments. Where visual grade was regarded as continuous, sampling was completed up to a maximum of 2 m increments. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 98 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.

HOLE #FROM_mTO_mINTERVAL_mSAMPLE #TGC_%
CGD01441.5642.561X6881N.A.
CGD01442.5643.480.92X6882N.A.
CGD01446.3547.361.01X6883N.A.
CGD01448.949.740.84X6884N.A.
CGD014121.3121.880.58X688610.55
CGD014169.8171.111.31X6887N.A.
CGD014171.11171.70.59X68886.08
CGD014171.7172.40.7X68896.97
CGD014172.92173.580.66X68900.83
CGD014173.58174.320.74X68917.09
CGD01559.3559.850.5X68920.83
CGD01565.766.81.1X68930.16
CGD01566.867.81X68940.46
CGD01567.868.81X68950.1
CGD01568.869.81X68960.41
CGD01569.870.50.7X68970.3
CGD01570.571.350.85X68987.04
CGD01571.3572.351X689912.72
CGD01572.3573.351X69006.48
CGD01573.3574.351U45017.97
CGD01574.3575.351U45027
CGD01575.3576.351U45037.89
CGD01576.3577.351U45046.19
CGD01577.3578.41.05U450619.52
CGD015116.9117.91U45072.6
CGD015117.9118.961.06U45083.7
CGD01649.450.41U45090.27
CGD01650.451.41U45100.48
CGD01651.452.41U45111.08
CGD01654.455.71.3U45120.96
CGD01655.756.60.9U45131.9
CGD01656.657.330.73U45140.59
CGD01663.464.41U45152.92
CGD01664.465.61.2U45167.62
CGD01665.666.61U45175.36
CGD01666.667.61U45182.99
CGD01667.668.71.1U45193.68
CGD01668.769.650.95U4520N.A.
CGD01669.6570.550.9U4521N.A.
CGD01676.9577.951U4522N.A.
CGD01677.9578.951U45230.33
CGD01678.9579.951U45240.16
CGD01679.9580.951U45261.68
CGD01680.9581.650.7U45270.95
CGD016103.6104.781.18U45287.2
CGD016107.46108.430.97U45295.78
CGD016108.43108.880.45U45308.43

Qualified Persons

Nico Scholtz is a consulting geologist and has reviewed and approved the scientific and technical information in this news release. Mr. Scholtz is a registered Professional Natural Scientist with the South African Council for Natural Scientific Professions (Pr. Sci. Nat. No. 400299/07). Mr. Scholtz is the Company's "Qualified Person" as defined by NI 43-101 .

About Gratomic

Gratomic is a multinational company with projects in Namibia, Brazil, and Canada. The Company is focused on becoming a leading global graphite supplier and aims to secure a strong position in the EV (Electric Vehicle) battery supply chain. With the continued development of its flagship Aukam project and further exploration on the Company's Capim Grosso property, Gratomic sets itself apart by seeking out unique top-quality assets around the world. True to its roots, the Company will continue to explore graphite opportunities displaying potential for development. The Company ranked third place in the top 10 preforming mining stocks on the 2022 TSX Venture 50™.

Large quantities of high-quality vein graphite have been shipped for testing to confirm its viability as an anode material. Gratomic is confident that the test results will provide a unique competitive advantage in its desired target markets. The Company will continue to update the public on the status of these tests and will provide results as soon as they become available.

The Company has formed a collaboration agreement with Forge Nano. With its patented ALD (Atomic Layer Deposition) coating, this cooperation with Forge Nano is a key element to support Gratomic's strategies towards the value-added phases of production of graphite for anode applications, namely micronization, spheronization and coating, making Gratomic graphite a preferred choice for use in lithium-ion batteries.

For more information: visit the website at www.gratomic.ca or contact:

Arno Brand at abrand@gratomic.ca or (416) 561- 4095

Subscribe at gratomic.ca/contact/ to be added to our email list.

For Marketing and Media information, please email: info@gratomic.ca

"Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release."

Forward Looking Statements:

This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. Investors are cautioned that these forward-looking statements are neither promises nor guarantees and are subject to risks and uncertainties that may cause future results to differ materially from those expected. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances. All of the forward-looking statements made in this press release are qualified by these cautionary statements and by those made in our filings with SEDAR in Canada (available at www.sedar.com)

SOURCE: Gratomic Inc.



View source version on accesswire.com:
https://www.accesswire.com/706628/Gratomic-Provides-Drilling-Update-on-Capim-Grosso-Graphite-Project

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.